Reply to thread

Message

<blockquote data-quote="el_chupo_" data-source="post: 2678382" data-attributes="member: 559190">I have a 2004 type R 10&quot;.&nbsp; Right now I have it in a small sealed box, within the specs recomended by Alpine.&nbsp;&nbsp; I dont remember exactly, but arround .75ft^3, with polyfil in it as well.Using a US Acoustics USX600 amp.&nbsp; I dont know actual output, as the web site says 375w RMS at 2 ohm, and the manual says 300 W RMS at 2 ohm.&nbsp; Either way, thats the amp at the moment.I have gains set properly and all that, and really like the bass response, but was begining to want more, having this setup for about 2 years.&nbsp;&nbsp; I dont know if I want to do a slightly bigger sealed box, maybe 1-1.2 ft^3, or go with a small ported box.&nbsp; There are no recomended ported specs from alpine for this sub.I have also been thinking of geting a new Assassin when they come out, and the last one had very similar specs to my type R, as far as box sizes go.What should I do?thanksMatt</blockquote>

[QUOTE="el_chupo_, post: 2678382, member: 559190"] I have a 2004 type R 10". Right now I have it in a small sealed box, within the specs recomended by Alpine. I dont remember exactly, but arround .75ft^3, with polyfil in it as well. Using a US Acoustics USX600 amp. I dont know actual output, as the web site says 375w RMS at 2 ohm, and the manual says 300 W RMS at 2 ohm. Either way, thats the amp at the moment. I have gains set properly and all that, and really like the bass response, but was begining to want more, having this setup for about 2 years. I dont know if I want to do a slightly bigger sealed box, maybe 1-1.2 ft^3, or go with a small ported box. There are no recomended ported specs from alpine for this sub. I have also been thinking of geting a new Assassin when they come out, and the last one had very similar specs to my type R, as far as box sizes go. What should I do? thanks Matt [/QUOTE]

Verification