Reply to thread

Message

<blockquote data-quote="ted_the_mexican" data-source="post: 413235" data-attributes="member: 544399">why not just take some time and measure the inside of the trunk and conture the box to the inside of the trunk.&nbsp; Even though it seems like you have little experience in doing so, just grab a tape measure and start to draw it out.&nbsp; Use an angled front panel or even angle the back to conform to the seat.&nbsp; Use at least 3/4 inch MDF since its a bigger sub, get all the dimesions and peice together your box.&nbsp; Make sure to seal it all up with some silicon caulk so it doesnt vibrate and have poor resonance.&nbsp; Most importantly though measure before you make all your cuts and plans so that the box actually fits in the trunk.ORBuy the $70 Box and save yourself the trouble since with the little experience it seems you have, you might spend more time and effort building one than its worth.Good luck either way</blockquote>

[QUOTE="ted_the_mexican, post: 413235, member: 544399"] why not just take some time and measure the inside of the trunk and conture the box to the inside of the trunk. Even though it seems like you have little experience in doing so, just grab a tape measure and start to draw it out. Use an angled front panel or even angle the back to conform to the seat. Use at least 3/4 inch MDF since its a bigger sub, get all the dimesions and peice together your box. Make sure to seal it all up with some silicon caulk so it doesnt vibrate and have poor resonance. Most importantly though measure before you make all your cuts and plans so that the box actually fits in the trunk. OR Buy the $70 Box and save yourself the trouble since with the little experience it seems you have, you might spend more time and effort building one than its worth. Good luck either way [/QUOTE]

Verification