Reply to thread

Message

<blockquote data-quote="LowLinc" data-source="post: 3478230" data-attributes="member: 553786">heres what i have:RLP-12 (D2) in a 1.75 sealed box running off a us amps 50-HC (375rms @ 1 ohm underrated) its in the trunk of a 88 tercel.i want to build a ported box to get it louder but still retain most some of the SQ.can someone help me design a ported box for this? should i port it thru the rear deck? i have 15&quot; of height inder the rear deck and 24&quot; between my rear speakers. depth doesnt really matter.here are the specs off soundsplinter.com:Dual 2 OhmQes: 0.226Qms: 2.470Fs: 23.43 HzRe: 3.7 OhmLs: 4.060 mHRp: 7.478Vas: 87.73 LMms: 177.9 gCms: 259.2 uBl: 20.70 T*mSPL: 88.81 dBSd: 0.0471 m^2Xmax: 24.2 mmDisplacement .15 cu ft.</blockquote>

[QUOTE="LowLinc, post: 3478230, member: 553786"] heres what i have: RLP-12 (D2) in a 1.75 sealed box running off a us amps 50-HC (375rms @ 1 ohm underrated) its in the trunk of a 88 tercel. i want to build a ported box to get it louder but still retain most some of the SQ. can someone help me design a ported box for this? should i port it thru the rear deck? i have 15" of height inder the rear deck and 24" between my rear speakers. depth doesnt really matter. here are the specs off soundsplinter.com: Dual 2 Ohm Qes: 0.226 Qms: 2.470 Fs: 23.43 Hz Re: 3.7 Ohm Ls: 4.060 mH Rp: 7.478 Vas: 87.73 L Mms: 177.9 g Cms: 259.2 u Bl: 20.70 T*m SPL: 88.81 dB Sd: 0.0471 m^2 Xmax: 24.2 mm Displacement .15 cu ft. [/QUOTE]

Verification