Reply to thread

Message

<blockquote data-quote="Antics" data-source="post: 5981477" data-attributes="member: 584067">I have a Clarion DXZ785USB (6volt pre amp outlets.)I have all the necessary wires spliced and connected EXCEPT I have 2 yellow wires left on the HU harness. They are both connected to fusesYellow Wire (3A) : Bus Power Lead (connect directly to battery)Yellow Wire (15A) : Memory Back-up Lead (connect directly to battery)I only have 1 wire left on the aftermarket harnessYellow Wire : 12 Volt Batt/Memory (12V Battery/Constant)<img src="http://img36.imageshack.us/img36/6527/0528091933.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />how would I go about connecting them? wire both from the HU to the battery?if I wire from the battery to the HU what type/size wire should I use? and should I connect both those wires from the clarion harness to the 1 wire coming from the battery? Ignoring the yellow wire from the aftermarket harness?also same question goes for the ground, what type of wire and should I just run it to the chassis of the floor? I have a 92 mitsubishi 3000gt where it&#039;s required to run your own ground (to the radio chassis)Thanks I&#039;m a noob //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif</blockquote>

[QUOTE="Antics, post: 5981477, member: 584067"] I have a Clarion DXZ785USB (6volt pre amp outlets.) I have all the necessary wires spliced and connected EXCEPT I have 2 yellow wires left on the HU harness. They are both connected to fuses [B]Yellow Wire (3A)[/B] : Bus Power Lead (connect directly to battery) [B]Yellow Wire (15A)[/B] : Memory Back-up Lead (connect directly to battery) I only have 1 wire left on the aftermarket harness [B]Yellow Wire[/B] : 12 Volt Batt/Memory (12V Battery/Constant) [IMG]http://img36.imageshack.us/img36/6527/0528091933.jpg[/IMG] how would I go about connecting them? wire both from the HU to the battery? if I wire from the battery to the HU what type/size wire should I use? and should I connect both those wires from the clarion harness to the 1 wire coming from the battery? Ignoring the yellow wire from the aftermarket harness? also same question goes for the ground, what type of wire and should I just run it to the chassis of the floor? I have a 92 mitsubishi 3000gt where it's required to run your own ground (to the radio chassis) Thanks I'm a noob [IMG]//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif[/IMG] [/QUOTE]

Verification