Reply to thread

Message

<blockquote data-quote="Bologna" data-source="post: 6745952" data-attributes="member: 609666">Ok I just got a new Jeep Cherokee, for some reason when I installed my sub won&#039;t play normal. All the speakers play music but the sub doesn&#039;t hit hard at all. The only way you can tell it&#039;s playing is by touching it.I have the headunit(Sony Xplod GT510)&nbsp; wired up correctly I believe, it&#039;s a brand new headunit so there shouldn&#039;t be a problem with it. I have the headunit&#039;s Amp Rem wire with the remote wire coming from the amp.I have a good solid ground on my amp and the power wire works. I have good 12ga wires going to my sub, which work.I am running 4 channel RCAs but only have 2 (RR, RL) plugged into the headunit. They are plugged into the rear rca ports. Then they are plugged into the amp&#039;s input ports.The amp turns on (it has an lcd screen which shows voltage, etc..)(Crunch GP1600.1). The amp doesn&#039;t go into protection mode.I know the sub works because I had it hooked up to my tv 30 seconds before I installed it into my Jeep.I have no option to turn my sub on in my headunit. The manual says there is an option but it isn&#039;t on the headunit.The RCAs on the back of my headunit read .3 so the RCAs should be good.Why does the sub play extremely quiet to the point of me not being able to hear it?What am I forgetting or what is wrong?Thanks,Bologna</blockquote>

[QUOTE="Bologna, post: 6745952, member: 609666"] Ok I just got a new Jeep Cherokee, for some reason when I installed my sub won't play normal. All the speakers play music but the sub doesn't hit hard at all. The only way you can tell it's playing is by touching it. I have the headunit(Sony Xplod GT510) wired up correctly I believe, it's a brand new headunit so there shouldn't be a problem with it. I have the headunit's Amp Rem wire with the remote wire coming from the amp. I have a good solid ground on my amp and the power wire works. I have good 12ga wires going to my sub, which work.I am running 4 channel RCAs but only have 2 (RR, RL) plugged into the headunit. They are plugged into the rear rca ports. Then they are plugged into the amp's input ports. The amp turns on (it has an lcd screen which shows voltage, etc..)(Crunch GP1600.1). The amp doesn't go into protection mode. I know the sub works because I had it hooked up to my tv 30 seconds before I installed it into my Jeep. I have no option to turn my sub on in my headunit. The manual says there is an option but it isn't on the headunit. The RCAs on the back of my headunit read .3 so the RCAs should be good. [B]Why does the sub play extremely quiet to the point of me not being able to hear it?[/B] What am I forgetting or what is wrong? Thanks, Bologna [/QUOTE]

Verification