Reply to thread

Message

<blockquote data-quote="fngizmo7" data-source="post: 800065" data-attributes="member: 560170">I have a Sony CDX-M8800 CD/MP3 Player Installed. Everything worked fine for about 6 months, until I discovered a short near the sub-woofers. It blew a few fuses on the amp. After replacing the fuses on the amp, the amp worked for about a few hours then the system shut off. So, I thought it was the amp and have since got a new one. The new amp, now has power, and everything is installed properly. The subs are still working fine (tried them out in my friends car). I also tested the rca&#039;s to make sure there wasn&#039;t a pinch or something in the wiring back to the amp and it was passing signals fine. The only thing I can think is that the Head Unit itself is not sending a signal to the pre-outs.Has anyone ever heard of the pre-outs burning out? Can this be fixed?I already reset the radio itself and that didn&#039;t work. The inside speakers work fine, its just not sending any signal to the amp. Also, I don&#039;t have another HU with pre-outs to see if another one would work. Any suggestions?</blockquote>

[QUOTE="fngizmo7, post: 800065, member: 560170"] I have a Sony CDX-M8800 CD/MP3 Player Installed. Everything worked fine for about 6 months, until I discovered a short near the sub-woofers. It blew a few fuses on the amp. After replacing the fuses on the amp, the amp worked for about a few hours then the system shut off. So, I thought it was the amp and have since got a new one. The new amp, now has power, and everything is installed properly. The subs are still working fine (tried them out in my friends car). I also tested the rca's to make sure there wasn't a pinch or something in the wiring back to the amp and it was passing signals fine. The only thing I can think is that the Head Unit itself is not sending a signal to the pre-outs. Has anyone ever heard of the pre-outs burning out? Can this be fixed? I already reset the radio itself and that didn't work. The inside speakers work fine, its just not sending any signal to the amp. Also, I don't have another HU with pre-outs to see if another one would work. Any suggestions? [/QUOTE]

Verification