Reply to thread

Message: <blockquote data-quote="DirtySchemer" data-source="post: 365183" data-attributes="member: 550163">I would assume that the 501s would be for the subs and the 501x for the highs.The 501x would probably be a good choice for the highs, however you may have some problems wiring the 501s.  I would assume you'd want to bridge it and give it a 2 ohm load (two 4 ohm pioneers in parallel).  This amp won't be able to handle the 2 ohm load when bridged.  You may want to look into the 501bd from rockford if that's the brand you like.However, I could easily be mistaken in my assumption that your subs are 4 ohms each.  If they are 2 ohms or dvc 4 ohms, then your 501s could still work.</blockquote>

Top