Reply to thread

Message

<blockquote data-quote="okiedokie" data-source="post: 5779160" data-attributes="member: 599205">^^^with any speakers you&#039;ll need to xover them over on your deck 80-100hz to start withdeadening your doors will help the response of the mids.the ID &amp;amp; Cadence will be a good starter combo for you.you want your mids to play mid range &amp;amp; mid bass.let you sub control the lower bass notes.your sub amp does have a xover on it,1)first start by setting your 7 band parametric EQ to flat.2)turn off the xover on the deck to pass or off3)on your amp&nbsp; there is a LOW PASS filter which is your xover (50-150), try to set it between 65-80, to start with.Bass boost @ 0,Subsonic filter to off, you wont need a subsonic filter unless your&#039;e going with a ported box.now after you have adjusted everything you can start to play with the 7band EQ.oH have you treble,mid,bass,set to 0.to start with.listen to this[MEDIA=youtube]I5E9mjI3y1E[/MEDIA]</blockquote>

[QUOTE="okiedokie, post: 5779160, member: 599205"] ^^^ with any speakers you'll need to xover them over on your deck 80-100hz to start with deadening your doors will help the response of the mids. the ID & Cadence will be a good starter combo for you. you want your mids to play mid range & mid bass. let you sub control the lower bass notes. your sub amp does have a xover on it, 1)first start by setting your 7 band parametric EQ to flat. 2)turn off the xover on the deck to pass or off 3)on your amp there is a LOW PASS filter which is your xover (50-150), try to set it between 65-80, to start with.Bass boost @ 0,Subsonic filter to off, you wont need a subsonic filter unless your'e going with a ported box. now after you have adjusted everything you can start to play with the 7band EQ. oH have you treble,mid,bass,set to 0.to start with. listen to this [MEDIA=youtube]I5E9mjI3y1E[/MEDIA] [/QUOTE]

Verification