Reply to thread

Message

<blockquote data-quote="gunny86" data-source="post: 83922" data-attributes="member: 544625"><p>ok here we you said you dont need to know what gauge wire to use so this is what you do take your power cable find a spot on your firewall that you can go through like a gromet or boot or somthing ( careful!) put you power cord through there then run it up near to your battery then attach the power wire to a fuse within 12 inches from your battery. do not connect it yet!! run the rest of the power wire through your car (under the carpet etc) untill you get to your trunk ( or whereever you have your amps are) connect it to your D block the run your power cables to your amps also have your amps grounded before you connect power but you shouldnt have it connect to the battery yet so. find a good spot for your ground wires and scrape away any paint and bolt them to the body. try not to connect them to support bars or things like that try to get them connected directly to the body. also run your remote wire along with your power cable then get a Y spliter and split it to both amps. when runing your audio wires from your head unit have them on the oposite side of the car that you ran the power cables. then run your speaker wires to your subs(did you want to know what way to do this also?) also make sure you have good grounds before you connect the fused power wire to the battery. did i forget any thing? well good luck and have fun!!!</p></blockquote><p></p>

[QUOTE="gunny86, post: 83922, member: 544625"] ok here we you said you dont need to know what gauge wire to use so this is what you do take your power cable find a spot on your firewall that you can go through like a gromet or boot or somthing ( careful!) put you power cord through there then run it up near to your battery then attach the power wire to a fuse within 12 inches from your battery. do not connect it yet!! run the rest of the power wire through your car (under the carpet etc) untill you get to your trunk ( or whereever you have your amps are) connect it to your D block the run your power cables to your amps also have your amps grounded before you connect power but you shouldnt have it connect to the battery yet so. find a good spot for your ground wires and scrape away any paint and bolt them to the body. try not to connect them to support bars or things like that try to get them connected directly to the body. also run your remote wire along with your power cable then get a Y spliter and split it to both amps. when runing your audio wires from your head unit have them on the oposite side of the car that you ran the power cables. then run your speaker wires to your subs(did you want to know what way to do this also?) also make sure you have good grounds before you connect the fused power wire to the battery. did i forget any thing? well good luck and have fun!!! [/QUOTE]

Verification