Reply to thread

Message: <blockquote data-quote="blackbonnie" data-source="post: 4172933" data-attributes="member: 573596"><p>the 10 cant be wired to 2 ohm , only 4 or 1 ohm. if you are bridging your amp it is most likely not stable at 2 ohms. only 4. so since the 12 is wired down to 2 ohms, it is sending your amp into protect mode due to a to low of impedence. post up the specs on your amp and i will let you know how you need to wire it, for it to work</p></blockquote><p></p>

Top