Reply to thread

Message: <blockquote data-quote="Mitch86" data-source="post: 6776502" data-attributes="member: 568012"><p>Thanks for all the advice guys. I'll keep in mind that I could use a little more port area if (when) I decide to make a new box. When I have the time I plan on building a fancy box and making everything look good. Right now I have a sealed dual 8 box converted into a ported 8 box with a piece of pvc hanging out of it.  Wires running through the port also. It's not pretty but it's loud. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I expect to run a little more power to it after break in too. Still seems like it should be broke in by now, but still a lot of noise from the suspension. and I dont think it could be bottoming out as I'm not running over RMS to it.</p></blockquote><p></p>

Top