Reply to thread

Message: <blockquote data-quote="snoop3111" data-source="post: 8243964" data-attributes="member: 637880"><p>Basic things to always check first is that you have a good ground. Metal on metal with a soild ring terminal. Then check how you have subs wired. You didn't say if you had 2 ohm or 4 ohm but I suggest looking up a wire diagram online somewhere like crutchfield. Finally, if all else fails, check your voltage at the amplifier. Your going to need a multimeter or something that can measure 12v DC. If everything is wired correctly than its probably your amp. Anything made by boss,pyle,lanzar,dual, or anything you can buy at walmart is probably a waste of money.</p></blockquote><p></p>

Top