Reply to thread

Message

<blockquote data-quote="Trevor9168" data-source="post: 7490904" data-attributes="member: 636751">I recently decided to remove the original radio in my truck, and put in the aftermarket from my car. I did all the fabrication and I have the head unit in, but Im not getting power... So I am running a wire from the battery wire on the harness to the fuse box, and I am able to get power to the radio, but it turns on my parking lights. I found a way to get power to the radio without the parking lights coming on, yet when I shut off the radio and turn it back on, it&#039;s settings are reset...^^^^This all may sound jumbled, but it&#039;s only because I am confused, and partially frustrated simply due to the fact I installed the radio into my car with no problems previously.If anyone knows where I should tie in on the fuse box so that the parking lights dont turn on, and the memory doesn&#039;t reset, that would be fantastic! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif.</blockquote>

[QUOTE="Trevor9168, post: 7490904, member: 636751"] I recently decided to remove the original radio in my truck, and put in the aftermarket from my car. I did all the fabrication and I have the head unit in, but Im not getting power... So I am running a wire from the battery wire on the harness to the fuse box, and I am able to get power to the radio, but it turns on my parking lights. I found a way to get power to the radio without the parking lights coming on, yet when I shut off the radio and turn it back on, it's settings are reset... ^^^^This all may sound jumbled, but it's only because I am confused, and partially frustrated simply due to the fact I installed the radio into my car with no problems previously. If anyone knows where I should tie in on the fuse box so that the parking lights dont turn on, and the memory doesn't reset, that would be fantastic! [IMG]//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif[/IMG]. [/QUOTE]

Verification