Reply to thread

Message

<blockquote data-quote="shortnugly" data-source="post: 8917786" data-attributes="member: 565152">Thanks all. I have a CRV EX, no factory amp. Still working on getting more info on OEM freq range.I&#039;ll look into getting the app for a sweep measure but my stock speakers are so crappy I dont think they could reproduce anything below 80hz.I like the idea of just using the LOC main out and crossing over with the sub amp. &nbsp;Amps are: Arc Audio 2050 CXL 2x50 @ 4 ohm no RCA outs--- and Kicker DX 500.1 300 @ 4 ohm with RCA outsThe Kicker has an infrasonic filter I was planning on engaging at 20-25hz. Because it&#039;s a smaller sub amp, the plan was to fiberglass a sealed enclosure with about .7-.8 cu ft and run a L7T or some small enclosure sub. I dont think I could get that sub down past 30hz anyway (different rabbithole) so the loss of the lower freq may not matter. I&#039;ll report back with what I found. Appreciate the help.</blockquote>

[QUOTE="shortnugly, post: 8917786, member: 565152"] Thanks all. I have a CRV EX, no factory amp. Still working on getting more info on OEM freq range. I'll look into getting the app for a sweep measure but my stock speakers are so crappy I dont think they could reproduce anything below 80hz. I like the idea of just using the LOC main out and crossing over with the sub amp. Amps are: Arc Audio 2050 CXL 2x50 @ 4 ohm no RCA outs--- and Kicker DX 500.1 300 @ 4 ohm with RCA outs The Kicker has an infrasonic filter I was planning on engaging at 20-25hz. Because it's a smaller sub amp, the plan was to fiberglass a sealed enclosure with about .7-.8 cu ft and run a L7T or some small enclosure sub. I dont think I could get that sub down past 30hz anyway (different rabbithole) so the loss of the lower freq may not matter. I'll report back with what I found. Appreciate the help. [/QUOTE]

Verification