Reply to thread

Message

<blockquote data-quote="ARK_SWAMP_RIDER" data-source="post: 7244501" data-attributes="member: 585878">I&#039;ve got a 03 Toyota 4runner equipped with the OEM JBL system. I have a Pioneer avh-p4300dvd head unit I just tried putting in. I have the Metra TYTO-01 harness and ASWC steering wheel control interface.My first issue is that my volume seems very low. I&#039;ve got to have it cranked up to 25-30 to be at &quot;normal&quot; listening volume. I know there&#039;s an adjustment on the TYTO, but messing with that seemed to make no difference. I&#039;m wondering if maybe the adjustment knob isn&#039;t working, because it seems just like a buddies I did a few weeks ago when the know was turned down. Also, my volume keeps fluctuating up and down. I&#039;ll be listening and all the sudden I&#039;ll get a louder burst (not &quot;loud&quot;, just louder than it was).y second issue is the ASWC. I&#039;ve got it hooked up just as shown in the manual. When doing the programming, I get the correct LED flashes for my setup. It shows to program, but then afterwards none of my buttons worked. I just did a buddies not long ago, so I&#039;m familiar with the process. Only difference is he used the PAC interface and I used the Metra. I know his called for a resistor between pins 7 and 8 on the harness and the Metra doesn&#039;t. Could this be the issue? Any input is greatly appreciated.</blockquote>

[QUOTE="ARK_SWAMP_RIDER, post: 7244501, member: 585878"] I've got a 03 Toyota 4runner equipped with the OEM JBL system. I have a Pioneer avh-p4300dvd head unit I just tried putting in. I have the Metra TYTO-01 harness and ASWC steering wheel control interface. My first issue is that my volume seems very low. I've got to have it cranked up to 25-30 to be at "normal" listening volume. I know there's an adjustment on the TYTO, but messing with that seemed to make no difference. I'm wondering if maybe the adjustment knob isn't working, because it seems just like a buddies I did a few weeks ago when the know was turned down. Also, my volume keeps fluctuating up and down. I'll be listening and all the sudden I'll get a louder burst (not "loud", just louder than it was). y second issue is the ASWC. I've got it hooked up just as shown in the manual. When doing the programming, I get the correct LED flashes for my setup. It shows to program, but then afterwards none of my buttons worked. I just did a buddies not long ago, so I'm familiar with the process. Only difference is he used the PAC interface and I used the Metra. I know his called for a resistor between pins 7 and 8 on the harness and the Metra doesn't. Could this be the issue? Any input is greatly appreciated. [/QUOTE]

Verification