Reply to thread

Message

<blockquote data-quote="jt34237" data-source="post: 7024973" data-attributes="member: 621608">--------------------------------------------------------------------------------So I&#039;m in one of those positions were i have to use what I can get my hands on due to being financially strapped. Right now I have a 12 in kicker hooked up to a 4 channel amp in the trunk. Doesn&#039;t sound to bad. Enough bass for me.&nbsp; Now I need/want to put some power to coaxials but don&#039;t know where to start. Normally I would pay someone to do this but not in a position to do that right now.I have a 4 channel hifonics amp that should get about 55 rms a channel. I want to hook it up to the DB drives I have in the rear and the alpine type S speakers I have in the front. Not sure if I&#039;m going to keep the rear speakers running but would still like to run the wires like I&#039;m going to. We&#039;ll see how loud my front stage is once I get everything powered. The deck I have only has one 2 volt preout. Right now there is only one power wire coming off the battery to the amp in the trunk.If you need more information just ask.The deck is VERY basic - pioneer 1100MPPioneer DEH-1100MP CD receiver at Crutchfield.comIf you have links that would send me in the right direction that would be fine too. Just understand that I have NEVER done this before. I&#039;ve never even taken a deck out of a car.Thanks everyone!Jason</blockquote>

[QUOTE="jt34237, post: 7024973, member: 621608"] -------------------------------------------------------------------------------- So I'm in one of those positions were i have to use what I can get my hands on due to being financially strapped. Right now I have a 12 in kicker hooked up to a 4 channel amp in the trunk. Doesn't sound to bad. Enough bass for me. Now I need/want to put some power to coaxials but don't know where to start. Normally I would pay someone to do this but not in a position to do that right now. I have a 4 channel hifonics amp that should get about 55 rms a channel. I want to hook it up to the DB drives I have in the rear and the alpine type S speakers I have in the front. Not sure if I'm going to keep the rear speakers running but would still like to run the wires like I'm going to. We'll see how loud my front stage is once I get everything powered. The deck I have only has one 2 volt preout. Right now there is only one power wire coming off the battery to the amp in the trunk. If you need more information just ask. The deck is VERY basic - pioneer 1100MP Pioneer DEH-1100MP CD receiver at Crutchfield.com If you have links that would send me in the right direction that would be fine too. Just understand that I have NEVER done this before. I've never even taken a deck out of a car. Thanks everyone! Jason [/QUOTE]

Verification