Bought of wmflyfisher earlier this week to pair up with the DIYMA 12 he sold me. Set up is for a friend so IF I do sell this i need a replacement amp. 400w @4ohms or something close to it should be plenty for the sub and I also need a cheap 4channel ~75x4 @4ohms.
I planned on using the 500/1v1 and letting him temporarily use my RF Punch 150 for the speakers (until i repair my 4chan). But if I can downgrade my mono and get a 4channel, or even a 2channel (w/ head unit bridged on rears) that should be sufficient for him.
Basically looking for a cheaper/lower powered would be ok mono, and at least 75x2, preferably 75x4 or close to it.
as you can see minor scuff to the lower left here... only damage on the amp
Price is $200 Firm
I planned on using the 500/1v1 and letting him temporarily use my RF Punch 150 for the speakers (until i repair my 4chan). But if I can downgrade my mono and get a 4channel, or even a 2channel (w/ head unit bridged on rears) that should be sufficient for him.
Basically looking for a cheaper/lower powered would be ok mono, and at least 75x2, preferably 75x4 or close to it.
as you can see minor scuff to the lower left here... only damage on the amp
Price is $200 Firm
