Reply to thread

Message: <blockquote data-quote="KilluminatiDre" data-source="post: 8603971" data-attributes="member: 651544"><p>So I made the cuts for my box and when I mocked everything up it didn't quite fit right. Turns out they put 5/8 mdf on the shelf spot for 3/4 so my left and right pieces are alittle too short which makes the top and bottom pieces about 4/16th too wide. Would you guys suggest just recutting the left/right pieces longer to match the top/bottom or trim down the top/bottom to match the left/right? I have enough extra wood to recut the left/right pieces. My internal volume will just be alittle bit higher than planned.</p></blockquote><p></p>

Top