good loud SEALED woofers?

[saywhat? 5,000+ posts]

we are going to do a small blowthru on the truck and i want to run 3 12's sealed, or 4 10's sealed. i dont want to port as this is a tiny truck and i dont need all that. I just want something that will hit real nice and not take up too much room. I can only go so deep because of the tubing work on the frame.

Click to read more...

 

[stuckinok 5,000+ posts]

Infinity Kappa Perfects

SSA Icon

Mach 5 IXL

RE SE

 

[macq32 10+ year member]

3 13tw5s would be sexxxx

 

[mcsoul 10+ year member]

Three si Mag v4's, RE MX or ID MAX. (all 12's)

 

[DBfan187 5,000+ posts]

Mounting depth is a concern, so most of these suggestions are absurd.

 

[JayRich 10+ year member]

Mounting depth is a concern, so most of these suggestions are absurd.

Then the Magv4 would be perfect then

 

[brmcm15 10+ year member]

Then the Magv4 would be perfect then

x2

 

[kmanian 5,000+ posts]

what kinda power are you wanting to put to them?

 

[SQPL 10+ year member]

Depends on how much power you have but these are my suggestions.

4 - JBL P1022s

4 - JBL 10GTIs

 

[macq32 10+ year member]

Mag v4 or 13tw5 would be the best bet, i would narrow my choices to that for the most part

 

[audioholic 5,000+ posts]

You want to do 3 12's, but they must remain sealed due to space restrictions...? If it was me, id be looking at a single sub ported then. It would be alot cheaper than trying to run three sealed subs.

 

[kmanian 5,000+ posts]

You want to do 3 12's, but they must remain sealed due to space restrictions...? If it was me, id be looking at a single sub ported then. It would be alot cheaper than trying to run three sealed subs.

I kinda agree, 2 nice 10's or 1 badass 12 ported. unless your wanting to really stay SQ, but you describe wanting "loud"

 

[billjones42 10+ year member]

might be flame time cuz everyone thinks they're overrated. but 3 or 4 jl 10w6's would work.

 

[saywhat? 5,000+ posts]

Mounting depth is a concern, so most of these suggestions are absurd.

i'd have about a foot or so to work with. it will not be flush with the fab, its goin to be about 2-3 inches out fron tof the back wall and then glassed in....just gotta figure out how to do that....meaning the steps, i know how to glass in general

 

[saywhat? 5,000+ posts]

You want to do 3 12's, but they must remain sealed due to space restrictions...? If it was me, id be looking at a single sub ported then. It would be alot cheaper than trying to run three sealed subs.

back wall has a wierd shape, cuz the ****** tunnel being raised from the stock floor BD. I don't want ported really, but if I had to, I would. I just want a nice clean crisp system, I guess I coul do a couple 12's, or a single 15 ported. and use (3) 4 inch aeros. Power just depends on what the subs need, I don't really mind buying stuff but I don't want to spend 3 grand on it.