Sold FS: XXX components, Diamond D7402, PPI PC650

newtitan
10+ year member

CarAudio.com Elite
Rating: 0%
0 0 0
up for sale is some stuff I have laying around

1) 2007 XXX component set, its NIB, never powered, only opened up the plastic to check everything and measure the mids. I was going to put them in my SUV, but they are too deep at 3" deep. everything else is packed up and new/. please note this is the newer non xbl2 version I think since I just bought them (not sure how to tell other than purchase dare?)

$300 shipped

2) Precision Power PPI PC650 anyway the amp is of course older, but work 10/10 has some cosmetic blemishes (small superficial scratches on the heatsink), and two of the mounting tabs are bent (can easily bend them back with some pliers if need be) but I know how cosmetics are a BIG deal

so its about a 6/10 and is priced accordingly well at least imo

the unit is 50x6, but the only caveat is that the rear two channels are crossover limited to 90hz even though they are class a/b channels ( They do run 100x2 @ 2 ohm though)

so this is basically a small 5 channel since subs these days are not as efficient as the one from this era

Ive ran this on two arc 12's in stereo so 50W rms @ 4 ohm (dual d2's) 12V and had no concerns with output in a 1.8 cu ft sealed enclosure, but I do think this would be awesome with two d4's wired to 2 ohm stereo

the front section is the same clean ppi 50x4 that most who know if one of the best ever made (well imo that is)

the amp will do 100x4 @ 2 ohm if you have 2 ohm mids (option orion hcca's, id's cxs series, and or the new series come in 2 ohm, also the RE XXX component set is also 2 ohm would be a great option imo)

lastly it will also do 200X3 bridged for those that have say three tens, or three efficient 12's, this is perfect imo

just not the best for super sub folks of course

210 shipped

I have the manual (very important when setting the crossovers, gains, and qbass controller usage if need be), I also have the Qbass controller (though its old, and missing the face cover, so its not in the best condition, but it does work though, and the original wire is mint and extremely long. all plugs are in perfect shape, nothing stripped. please disregard my mattress cover

ill have pics once I get home from work

my references

all I need in trades

are two 750 gb 32mb cache hard drives, and a new DLP tv if you are local to norcal

 
up for sale is some stuff I have laying around
1) 2007 XXX component set, its NIB, never powered, only opened up the plastic to check everything and measure the mids. I was going to put them in my SUV, but they are too deep at 3" deep. everything else is packed up and new/. please note this is the newer non xbl2 version I think since I just bought them (not sure how to tell other than purchase dare?)

$300 shipped

2) Precision Power PPI PC650 anyway the amp is of course older, but work 10/10 has some cosmetic blemishes (small superficial scratches on the heatsink), and two of the mounting tabs are bent (can easily bend them back with some pliers if need be) but I know how cosmetics are a BIG deal

so its about a 6/10 and is priced accordingly well at least imo

the unit is 50x6, but the only caveat is that the rear two channels are crossover limited to 90hz even though they are class a/b channels ( They do run 100x2 @ 2 ohm though)

so this is basically a small 5 channel since subs these days are not as efficient as the one from this era

Ive ran this on two arc 12's in stereo so 50W rms @ 4 ohm (dual d2's) 12V and had no concerns with output in a 1.8 cu ft sealed enclosure, but I do think this would be awesome with two d4's wired to 2 ohm stereo

the front section is the same clean ppi 50x4 that most who know if one of the best ever made (well imo that is)

the amp will do 100x4 @ 2 ohm if you have 2 ohm mids (option orion hcca's, id's cxs series, and or the new series come in 2 ohm, also the RE XXX component set is also 2 ohm would be a great option imo)

lastly it will also do 200X3 bridged for those that have say three tens, or three efficient 12's, this is perfect imo

just not the best for super sub folks of course

210 shipped

I have the manual (very important when setting the crossovers, gains, and qbass controller usage if need be), I also have the Qbass controller (though its old, and missing the face cover, so its not in the best condition, but it does work though, and the original wire is mint and extremely long. all plugs are in perfect shape, nothing stripped. please disregard my mattress cover

ill have pics once I get home from work

my references

all I need in trades

are two 750 gb 32mb cache hard drives, and a new DLP tv if you are local to norcal
do you still have the ppi 650 ?

 
ya i'm rebuilding my doors to fit my XXX comps

IMG00052.jpg


img100.jpg


 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

newtitan

10+ year member
CarAudio.com Elite
Thread starter
newtitan
Joined
Location
CALI
Start date
Participants
Who Replied
Replies
18
Views
2,515
Last reply date
Last reply from
tyler_ofspain
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top