Sold FS Scan12m, HAT L4, Soundstream D series, DLS and more

[Here-I-Come 10+ year member]

Some things came up and have to sale off some stuff. Thanks to everyone for looking and your help in advance.

All items guarantee not to be DOA and are 100% full funcational!

I have a set of very good condition (rated 8 out of 10) DLS Nobelium tweeters. The grilles are painted black. 110.00 shipped in the US.

I have a set vary good condition (rated 8.5 out of 10) DLS Iridium 3 dome midranges. 150 shipped in the US

Pictures are coming, they are at a friends house. I promise they are near mint.

I have a set of Hiquphon OW1-fs. One of the unit has a small ding in the side of the dome and does not affect the proformance of the tweeter in any way. The other unit has some small scuffs on the mounting flange. 165 shipped in the US

I have 2 good condition (rated 7 out of 10), great sounding Nelson Pass designed old school Soundstream D100’s (not series II). Rate at 50x2 rms @ 4 ohms and 120x1 rms @ 4 ohm. 85 each shipped or both for 155 shipped

I have a very good condition (rate 7.5 out of 10) old school Dual Mono Soundstream D200 (not series II). Rate at 100x2 rms @ 4 ohms and 240x1 rms @ 4 ohms. 135 shipped in the US.

If you one wants Both D100’s and the D200 I will Do 270 shipped in the US. And if you want 1 D100 and the D200 I will do 200 shipped.

Click to read more...

 

[Here-I-Come 10+ year member]

I have a great condition (rate 8 out of 10) Dual Mono old school Soundstream D200II. Its Rate at 100x2 @ 4 ohms or 2 ohms and 240x1 rms @ 4 ohms or 8 ohms. 165 shipped in the US.

If some one wants all the Soundstream amps I will do 415 shipped for all of them. These are the best some Soundstream ever produced (including the MC300 and MC500) and some of the best sounding amp ever produced. They make for one great sounding system.

I have set of Sonus Faber 12m’s. These are just Scan 12m’s with a Sonus Faber label on mods or changes. These are in the best cosmetic condition, but that are 100% functional. As you can see from the pictures one them is worst then the other. The cone is a little fuzzy one and on the other just a small drop is fuzz. These where tested by the gentlemen I purchased them from and that measure the same and measure like a new pair. I tested them for sound along with my OW1-fs and they sounded great. SOLD

I have a set of HAT L4 in mint condition. 165 shipped in the US.

I have a set of like new the Peerless 830986 3” fullrange midranges. I love the little drivers I hate to sell them, but need the funds. SOLD

I have a set of BNIB Scan 15W/4531G. 275 shipped in the US.

 

[Here-I-Come 10+ year member]

I have a NIB VIA M10000 mobo with 1 gig of 266 DDR DIMM and NIB M3-ATX 12 volt power supply and a NIB Toshiba 30 gig 2.5 with IDE to mini IDE adaptor. This would make a nice mobile carputer system. 185 shipped in the US. This a package deal at this price.

I have 2 BNIB Alto mobile ADP152 fullrange class D amps rated at 75x2 rms @ 4, 8, 16, or 32 ohms. These amps are not 2 ohm stable. Great sounding amps. If anyone wants more I have 15 more available to me. I also have available 8 of the ADP304’s 75x4. 155 shipped or 300 shipped for both

I have a set of the super Rare MIT Pro AutoTerminator speaker modules. It kind of hard to explain what they do your your system, but it you know of MIT cables it the same technology and these are based on there multi award winning Orcale seires Techonolgy. They retail for well over 1200 pair when that was produced. 250 shipped in the US.

Here are a few links to some reading on the technology:

MIT Cables - Patented Multipole Network Technology

MIT Cables - MIT Cables Technical / Whitepapers

I have a BNIB Alto mobile UCS Pro processor. 280 shipped in the US.

Here are specs:

Channel Layout:…………………………2 inputs / 6 outputs (phono type)

Max. input/output level:………………..Inputs 2V rms / Outputs 2.2V rms (0dB).

Conversion:……………………………...24 bits A-D and D-A

Freq. Response:…………………………20Hz - 20KHz (+/- 1dB)

S/N Ratio:………………………………..>95dBA

THD+N:………………………………….0.05% (20Hz - 20KHz)

Channel Separation:……………………>100dB, 20Hz - 20KHz

Input/Output Gain range:……………..-30 to +6 dB (0.5 dB steps)

Crossover Filters:……………………….High-Pass & Low-Pass (Bessel, Butterworth or Linkwitz-Riley), Filter slopes: selectable 6, 12, 18, 24, 48dB per octave

EQ Filters (Input/Output channels):…Gain: +/- 15dB, 0.5dB step

Frequency: 15.6Hz to 16KHz

Bandwidth (Q): 0.05 to 3 octaves, 0.05 oct. step

Channel Delay (Time Alignment):……0 - 291 ms (outputs), 0.021ms step

Dynamic Level Control:……………….Variable Threshold & Ratio, per output channel

On-board Preset Memory:…………….1 factory / 64 user (non-volatile)

PC Interface:……………………………9-pin RS232. Requires PC running Windows 98/ME/XP

Other Interfaces:…………………………25-pin D-SUB connector for optional Programmer

Operating Voltage:………………………11 - 16V DC (negative ground)

Dimensions:……………………………..228 x 175 x 42mm (including mounting brackets)

Weight:……………………………………1.3kg

Link to feature brake down of features:

http://www.diymobileaudio.com/forum/classifieds/54787-fs-dls-eclipse-alto.html#post668574

 

[Here-I-Come 10+ year member]

Sonus Faber/Scan 12m's and Peerless are sold.

 

[Here-I-Come 10+ year member]

up

 

[Here-I-Come 10+ year member]

up

 

[Here-I-Come 10+ year member]

moving up

 

[Here-I-Come 10+ year member]

D100's and D200 sold

 

[RidnClean 5,000+ posts]

i want those DLS tweets

good guy here BTW