Freshly re-coned 15" SI Mag.
Only issue is that I laid on the glue a bit too thick on the surround so the rubber gasket won't go back on. Works great, brand new re-cone //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
$300 shipped in continental USA.
Mounted to break it in / make sure coil was centered then actual T/S measured:
RE = 3.98 ohms (series)
Fs = 21.33 Hz
Qes = 0.44
Qms = 4.76
Qts = 0.40
Le = 3.9 mH
BL = 19.98 N/A
VAS = 172 L
Only issue is that I laid on the glue a bit too thick on the surround so the rubber gasket won't go back on. Works great, brand new re-cone //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
$300 shipped in continental USA.
Mounted to break it in / make sure coil was centered then actual T/S measured:
RE = 3.98 ohms (series)
Fs = 21.33 Hz
Qes = 0.44
Qms = 4.76
Qts = 0.40
Le = 3.9 mH
BL = 19.98 N/A
VAS = 172 L
