Reply to thread

Message

<blockquote data-quote="Kastlez_" data-source="post: 5566910" data-attributes="member: 584732">Here it goes. My main objective is to upgrade the stock 6.5mids to ID OEM mids and push them with a 125watts.I know nothing about front stage what so ever so with that said....First of all I&#039;m running everything off the stock oem stereo I have a hi-lo converter connected to my 6x9&#039;s for subs. I also have stock tweeters which i don&#039;t need to replace at the moment.* In order to hook up the ID OEMs would i need to purchase anything else besides the amp? like crossovers or is that not necessary since i&#039;m not buying a whole tweeter/mid/xover setOK SO..................................Mids = ID OEM (single 4ohm)Lets say i bought this amp here:<a href="http://www.icebuyer.co.uk/reference-7521a-2-channel-amplifier-p-11464.html" target="_blank">http://www.icebuyer.co.uk/reference-7521a-2-channel-amplifier-p-11464.html</a>* 2-channel Amplifier* 142 watts RMS x 2 channel at 2 ohmsI would need to wire parallel right? like this:<a href="http://www.the12volt.com/caraudio/woofer_configurations.asp~Q~2~I~41" target="_blank">http://www.the12volt.com/caraudio/woofer_configurations.asp~Q~2~I~41</a>*2ohm load for 142watts1) basically i need to know how to wire all this... what goes where?2) how would i wire the subs in parallel if they&#039;re on opposite sides of the car?3) should i be looking at a completely different amp or is this one fine?</blockquote>

[QUOTE="Kastlez_, post: 5566910, member: 584732"] Here it goes. My main objective is to upgrade the stock 6.5mids to ID OEM mids and push them with a 125watts. I know nothing about front stage what so ever so with that said.... First of all I'm running everything off the stock oem stereo I have a hi-lo converter connected to my 6x9's for subs. I also have stock tweeters which i don't need to replace at the moment. * In order to hook up the ID OEMs would i need to purchase anything else besides the amp? like crossovers or is that not necessary since i'm not buying a whole tweeter/mid/xover set OK SO.................................. Mids = ID OEM (single 4ohm) Lets say i bought this amp here: [URL="http://www.icebuyer.co.uk/reference-7521a-2-channel-amplifier-p-11464.html"]http://www.icebuyer.co.uk/reference-7521a-2-channel-amplifier-p-11464.html[/URL] * 2-channel Amplifier * 142 watts RMS x 2 channel at 2 ohms I would need to wire parallel right? like this: [URL="http://www.the12volt.com/caraudio/woofer_configurations.asp~Q~2~I~41"]http://www.the12volt.com/caraudio/woofer_configurations.asp~Q~2~I~41[/URL] *2ohm load for 142watts 1) basically i need to know how to wire all this... what goes where? 2) how would i wire the subs in parallel if they're on opposite sides of the car? 3) should i be looking at a completely different amp or is this one fine? [/QUOTE]

Verification