Reply to thread

Message: <blockquote data-quote="Canaan_Pavey" data-source="post: 8742936" data-attributes="member: 682847"><p>I ordered a new radio system from Crutchfield ,the Alpine UTE-73BT, along with the set up kit with the wire harness converter from my stock radio to the new one. After installing the new radio system I tested it out and found that the front right and left speakers do not work along with the antenna not working. The rear speakers both work but have a static sound once you turn it up past half volume. I read the manual front to back and made sure the wires were all connected correctly.  I did reconnect the factory radio and all the speakers worked perfectly. I am new to doing self install on car audio so is there anything that could help. Thanks.</p></blockquote><p></p>

Top