this amp is rated at about 2500 watts rms when bridge at 1 ohm. I had six speakers hooked up to it. They were all 8 ohms and 300 rms each. I had 3 of them in each channel makin it 2.67 ohms per channel. When the volume is set after a certain level the amp starts to go in and out of protect. i cant even put the gain at more than half, i tried putting 4 speakers intead of 6 and still does the same problem. What can this be? I switched my rca's,ground,extra battery,ho alternator, and im still getting this problem. 2 of my speakers on my t5002 sound the same as four speakers on the t15002. Please help.