Fosgate T seires handle 0.75 ohms?

[nickolas_j_t 10+ year member]

I have a Fosgate T1500-1BD and I want to hook it up to a JL 13W7. Can it handle the low ohms?

Click to read more...

 

[thegreatestpenn 5,000+ posts]

yep

 

[NightDrifter05 10+ year member]

With impedance rise you will probably be right at or over 1ohm.

 

[nickolas_j_t 10+ year member]

are you guys positive? I don't want to blow the nice,new amp.

 

[thegreatestpenn 5,000+ posts]

my friend ran 2 at 1/2 ohm with a panel over them. they would go into protect for about 5 minutes every 3 hours and start up again. so unless you have them under a panel for more than 3 hours of bump a time I think they will be fine

 

[roarzorz 10+ year member]

I ran 3 d4 HX2s wired all parallel for 0.67ohms for a while on a RF T10001bd. It ran fine daily. My bro screwed up and wired one to 0.5ohm once and it didn't last 10min before smoking. Never even went into protect, just smoked.

 

[Jeremy M 10+ year member]

ran a t3k at .5 for a hour or more...didnt' even warm up.