Reply to thread

Message

<blockquote data-quote="searcy1321" data-source="post: 3593779" data-attributes="member: 583010">MB Quart QSD 216 i can get these for 300Speaker Size 6-1/2&quot;Design 2-Way ComponentTweeter Design N/ATweeter Composition N/AWoofer Composition N/AWoofer Surround N/ASensitivity 90&nbsp; dBFrequency Response 35 - 32.000&nbsp; HzRMS Power Handling 80 - 150&nbsp; wattsPeak Power Handling N/AImpedance 4 ohmsTop Mount Depth 2.5&quot;Bottom-mount depth N/ACutout Dimensions 6.61&quot;Q-Series QSD 6-1/2&quot; Component SystemMidrange with 37mm (1.5&quot;) voice coil is used - Former made of Kapton foil (a temperature resistant plastic) that can withstand extreme heat25 mm (1&quot;) Titanium Dome tweeters with a highly elastic butyl rubber surroundBalanced Temperature Technology is used throughoutTweeter level can be adjusted in 2dB steps up to -6dBBuilt-in light bulb on the crossover networks to extend the life of the tweeter using overload protectionAbility to upgrade the midbass with the Add-A-Woofer-SystemMB Quart easy speaker connections. Connection types include solder, screw-down, spade or bare wireDesigned specifically for low-profile installations. The diecast aluminum baskets can be installed in most factory locations with little or no modification. They are lightweight and extremely rigidA new variation of the WPC process used in QSD is applied in the QSC component system.</blockquote>

[QUOTE="searcy1321, post: 3593779, member: 583010"] MB Quart QSD 216 i can get these for 300 Speaker Size 6-1/2" Design 2-Way Component Tweeter Design N/A Tweeter Composition N/A Woofer Composition N/A Woofer Surround N/A Sensitivity 90 dB Frequency Response 35 - 32.000 Hz RMS Power Handling 80 - 150 watts Peak Power Handling N/A Impedance 4 ohms Top Mount Depth 2.5" Bottom-mount depth N/A Cutout Dimensions 6.61" Q-Series QSD 6-1/2" Component System Midrange with 37mm (1.5") voice coil is used - Former made of Kapton foil (a temperature resistant plastic) that can withstand extreme heat 25 mm (1") Titanium Dome tweeters with a highly elastic butyl rubber surround Balanced Temperature Technology is used throughout Tweeter level can be adjusted in 2dB steps up to -6dB Built-in light bulb on the crossover networks to extend the life of the tweeter using overload protection Ability to upgrade the midbass with the Add-A-Woofer-System MB Quart easy speaker connections. Connection types include solder, screw-down, spade or bare wire Designed specifically for low-profile installations. The diecast aluminum baskets can be installed in most factory locations with little or no modification. They are lightweight and extremely rigid A new variation of the WPC process used in QSD is applied in the QSC component system. [/QUOTE]

Verification