Reply to thread

Message: <blockquote data-quote="cheeseyfella" data-source="post: 6901462" data-attributes="member: 624157">I have done some more trouble shooting, but things are getting worse. There is a 12 volt on the remote, and I disconnected the RCAs and the speaker out. I then got a small loop of wire and touched the 12+ in to the remote in to turn on the amp and it flashed for fraction of a second, now there is only 5 volts at the end of the power cable. I disconnected the power line at the fuse, there is 12v each side of the fuse, but only 6v at the end of the cable.Could this be a battery issue, a cable issue, or something else??? i have never ever seen anything like this, and really need some inpout from someone, even if it just something to recheck.</blockquote>

Top