Reply to thread

Message

<blockquote data-quote="Phrozt" data-source="post: 1873125" data-attributes="member: 567069">Here&#039;s full details on everything I had to install and how/when I did it:<a href="http:////forum/showthread.php?t=166066" target="_blank">http://www.caraudio.com/forum/showthread.php?t=166066</a>Problems:1) getting some (physical) bussing around front speakers2) back speakers distort at about half volume3) Get a high pitched shrill that is equal to how fast my engine is reving, only when audio system is engaged.&nbsp; It&#039;s not that loud, but it&#039;s constant volume, so it&#039;s noticable when the system is turned down4) After about half an hour of use, amp was hot as FUUUUUUCKCurrent amp settings:fronts: mid-high onlyback: fullgains (both): 1/3rdPossible fixes:1) Dynamat/remount speaker/crossover/grille2) Possibly cut out top of the back covering and just use grille for speaker (as it currently stands the top of the back covering MIGHT be touching the top of the speaker, which would interfere w/the physical movement of the cone.. possibly3) NO CLUE - PLEASE HELP4) NO CLUE - PLEASE HELPAny and all help is appreciated.&nbsp; Keep in mind, I am a noob.&nbsp; This is my first install w/runnig wire.&nbsp; This is my first install w/an amp of any kind whatsoever.&nbsp; I&#039;m sure I made some noob mistakes.Thanks</blockquote>

[QUOTE="Phrozt, post: 1873125, member: 567069"] Here's full details on everything I had to install and how/when I did it: [URL="http:////forum/showthread.php?t=166066"]http://www.caraudio.com/forum/showthread.php?t=166066[/URL] Problems: 1) getting some (physical) bussing around front speakers 2) back speakers distort at about half volume 3) Get a high pitched shrill that is equal to how fast my engine is reving, only when audio system is engaged. It's not that loud, but it's constant volume, so it's noticable when the system is turned down 4) After about half an hour of use, amp was hot as FUUUUUUCK Current amp settings: fronts: mid-high only back: full gains (both): 1/3rd Possible fixes: 1) Dynamat/remount speaker/crossover/grille 2) Possibly cut out top of the back covering and just use grille for speaker (as it currently stands the top of the back covering MIGHT be touching the top of the speaker, which would interfere w/the physical movement of the cone.. possibly 3) [B]NO CLUE - PLEASE HELP[/B] 4) [B]NO CLUE - PLEASE HELP[/B] Any and all help is appreciated. Keep in mind, I am a noob. This is my first install w/runnig wire. This is my first install w/an amp of any kind whatsoever. I'm sure I made some noob mistakes. Thanks [/QUOTE]

Verification