Finished everything finally. PIX

[Snow90 10+ year member]

what

It's hard to speak dumby but I'm pretty sure he means he couldn't fit the 2 sets in each door panel.

ricanballer- Ever thought about glassing your doors?

 

[hatedonmostly 5,000+ posts]

It's hard to speak dumby but I'm pretty sure he means he couldn't fit the 2 sets in each door panel.
ricanballer- Ever thought about glassing your doors?

four doors, four speakers

what is problem //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[the727kid 10+ year member]

Looks good but to make it look better I can give ya a few tips. (Don't take offense, everyone gets better with time and criticism of course)

1. Paint job on the box. An electric sander going 80/220/500/1000 would of made a worlds difference with the paint. (Still fixable)

2. The wiring... heat shrink + techflex will make a night and day difference, along with better terminal connections. A few zipties and a little rerouting of the wires and your A+. (Speaker/Remote for the Audioque amp I would drill a hole so the wires come up from under it and right into the amp, same for the crunch amp. I would reroute the fuse holder on the right to put it on the otherside so it is hidden and run the wire on the backside so it is hidden as well and have it come up on the backside of the battery.

 

[thericanballer 10+ year member]

nice setup. VIDEO!

thanks i will try to soon

what lvl is that? 4? 4xl? Overall nice looking setup, I miss my jeep, had 4 solo x 18s sitting in it at one time, and they never got used before getting sold lol.

xl, and thats crazy

Looks pretty good. How's it sound? I just finished my box for my SDC 15 and it looks just like that, only white //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

sounds great really.

How do you like those PG Ryvals? are they the ycomps or caoxials? i was lookin at those a while back on ebay and never could find any reviews on em.

i love the ryvals. theyre coax's but they get so loud and sound so good. i got four of them for 75

It's hard to speak dumby but I'm pretty sure he means he couldn't fit the 2 sets in each door panel.
ricanballer- Ever thought about glassing your doors?

whats that

four doors, four speakers
what is problem //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

no, my panels dont come off of my doors so i can put new speakers in. so i have to leave the crappy stock ones in and do what i did in the back

Looks good but to make it look better I can give ya a few tips. (Don't take offense, everyone gets better with time and criticism of course)
1. Paint job on the box. An electric sander going 80/220/500/1000 would of made a worlds difference with the paint. (Still fixable)

2. The wiring... heat shrink + techflex will make a night and day difference, along with better terminal connections. A few zipties and a little rerouting of the wires and your A+. (Speaker/Remote for the Audioque amp I would drill a hole so the wires come up from under it and right into the amp, same for the crunch amp. I would reroute the fuse holder on the right to put it on the otherside so it is hidden and run the wire on the backside so it is hidden as well and have it come up on the backside of the battery.

no hard feelings, im here to learn. thanks for the advice. i had to hand sand it bc i dont have the electric one and i cant afford it lol.

 

[jdawg 5,000+ posts]

lol, seriously dude lol at not being able to take off door panels on a jeep cherokee, one of the easiest vehicles to do work to on the face of the planet

 

[thericanballer 10+ year member]

lol, seriously dude lol at not being able to take off door panels on a jeep cherokee, one of the easiest vehicles to do work to on the face of the planet

well, when it comes to the dash yes. but the doors are literally glued on. i asked a guy on youtube with one, and he said he just cut the plastic in front of the stock ones, pulled them out, and the screwed the new ones onto the actually door panel, but i dont want to do that. did u actually get them off

 

[302yota 10+ year member]

any other electrical upgrades, besides the single batt in the back?....how well does ur electrical keep up?

 

[jdawg 5,000+ posts]

no they arent, I have worked at chrysler dealerships for the past 10 years, they take them off all the time. How do you think they get in there and fix window motors, wiring, etc.? Just buy a whole new door already painted with glass and everything already in it and install in on the jeep? What if you latch breaks? I guess you are fuked cause you cant get the door open to get it off and install an entire whole new door. If you cant get them off then take it to a repair shop so they can do it for you in about 15 seconds.

 

[thericanballer 10+ year member]

any other electrical upgrades, besides the single batt in the back?....how well does ur electrical keep up?

just the second bat and big 3. but i have no voltage drops at all.

no they arent, I have worked at chrysler dealerships for the past 10 years, they take them off all the time. How do you think they get in there and fix window motors, wiring, etc.? Just buy a whole new door already painted with glass and everything already in it and install in on the jeep? What if you latch breaks? I guess you are fuked cause you cant get the door open to get it off and install an entire whole new door. If you cant get them off then take it to a repair shop so they can do it for you in about 15 seconds.

i think i rather role the the speakers in the back lol. thanks tho

 

[KyleBechtold 5,000+ posts]

what year? my sis had one and the door panels are screwed in with a few small screws and then they pop up then off.. real easy..

 

[thericanballer 10+ year member]

what year? my sis had one and the door panels are screwed in with a few small screws and then they pop up then off.. real easy..

97, idk what you guys are talking bout, maybe the previous owner did this to them lol. bc they are impossible to take off

 

[mxer69 10+ year member]

looks nice...

Don't like the speakers but I do like the grills and how everything is blacked out. Adds a nice touch to it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[hatedonmostly 5,000+ posts]

just the second bat and big 3. but i have no voltage drops at all.

i think i rather role the the speakers in the back lol. thanks tho

extreme facepalm

 

[michaellane 5,000+ posts]

buddy of mine bought a car and come to find out the other owner glued his panels on as well...its possible...mine pop off with a screw driver //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif lol

 

[hatedonmostly 5,000+ posts]

Then chisel that shit off and install it the right way...