Reply to thread

Message: <blockquote data-quote="BCotrell" data-source="post: 8683907" data-attributes="member: 666314">So much for just giving feedback on a setup. Shredder and boomin typically give good feedback. Here’s what I read:- if you **** at a woodworking, probably should be on a woodworking forum to learn how to make cuts, not a car audio forum. - that rubicon Le dyno output was just under 1800 watts certified in a controlled environment in that test. Your 90 amp alternator (45 amps at most available for audio) and 2 batteries will not likely be enough to pull enough power to get near 1800 that resulted in that video.- xfl’s grin on 2k watts, an hd is going to laugh at 1000-1500 watts. Bought too big- if you came on the forum to learn than you would have learned that many guys are daily driving Brazilian mono’s that are far better for output on small electrical.</blockquote>

Top