Reply to thread

Message

<blockquote data-quote="sofbass" data-source="post: 1804625" data-attributes="member: 568377">Ok, well i made a really stupid mistake, i didn&#039;t seperate the two chambers for the subs, its going to be 2 12&quot; L7&#039;s ported.&nbsp; I plan on using some PVC pipe for the ports and not vented.Here&#039;s some pictures of the box.<a href="http://i7.photobucket.com/albums/y271/sofbassist/DSCF0460.jpg" target="_blank">http://i7.photobucket.com/albums/y271/sofbassist/DSCF0460.jpg</a>and you can see it doesn&#039;t have a piece of MDF to seperate the two subs in this one.<a href="http://i7.photobucket.com/albums/y271/sofbassist/DSCF0461.jpg" target="_blank">http://i7.photobucket.com/albums/y271/sofbassist/DSCF0461.jpg</a>its on the final stages of bondo, and i was bored so i decided to come up with a few painting ideas, thats why it has spraypaint on it.but anyways, the way im thinking about fixing this, is going and getting some balsa wood, making a kind of frame out of it, and just laying some glass over it and make a fiberglass wall to separate the two chambers.&nbsp; I plan on running ports out the top.Is it even necessary to separate the two chambers? Im pretty sure it is, but if it isnt, then it will save me a lot of time.If worse comes to worse, i might just cut off the fiberglass front, and make new top, bottom and sides for the box, that way i can separate the two chambers.Any help would be greatly apprecieated!</blockquote>

[QUOTE="sofbass, post: 1804625, member: 568377"] Ok, well i made a really stupid mistake, i didn't seperate the two chambers for the subs, its going to be 2 12" L7's ported. I plan on using some PVC pipe for the ports and not vented. Here's some pictures of the box. [URL="http://i7.photobucket.com/albums/y271/sofbassist/DSCF0460.jpg"]http://i7.photobucket.com/albums/y271/sofbassist/DSCF0460.jpg[/URL] and you can see it doesn't have a piece of MDF to seperate the two subs in this one. [URL="http://i7.photobucket.com/albums/y271/sofbassist/DSCF0461.jpg"]http://i7.photobucket.com/albums/y271/sofbassist/DSCF0461.jpg[/URL] its on the final stages of bondo, and i was bored so i decided to come up with a few painting ideas, thats why it has spraypaint on it. but anyways, the way im thinking about fixing this, is going and getting some balsa wood, making a kind of frame out of it, and just laying some glass over it and make a fiberglass wall to separate the two chambers. I plan on running ports out the top. Is it even necessary to separate the two chambers? Im pretty sure it is, but if it isnt, then it will save me a lot of time. If worse comes to worse, i might just cut off the fiberglass front, and make new top, bottom and sides for the box, that way i can separate the two chambers. Any help would be greatly apprecieated! [/QUOTE]

Verification