Reply to thread

Message

<blockquote data-quote="Pioneer~Saturn" data-source="post: 4965965" data-attributes="member: 569334">It&#039;d take time and patience but you could cut rings of MDF and keep stacking and glueing them together untill you have the right length...and you could even flare it on both ends by slightly changing the diameter of the rings when you come to the ends and then rounding over+sanding them smooth...//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif..that&#039;d be the way to do it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif (that way you can do any diameter you need //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif )(And as you glue every couple rings together you could sand the insides smooth or even get body filler and make the insides perfectly smooth, just a couple rings at a time so you could reach the part you were wanting to body-filler and sand //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif)</blockquote>

[QUOTE="Pioneer~Saturn, post: 4965965, member: 569334"] It'd take time and patience but you could cut rings of MDF and keep stacking and glueing them together untill you have the right length...and you could even flare it on both ends by slightly changing the diameter of the rings when you come to the ends and then rounding over+sanding them smooth...[IMG]//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif[/IMG]..that'd be the way to do it [IMG]//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif[/IMG] (that way you can do any diameter you need [IMG]//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif[/IMG] ) (And as you glue every couple rings together you could sand the insides smooth or even get body filler and make the insides perfectly smooth, just a couple rings at a time so you could reach the part you were wanting to body-filler and sand [IMG]//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif[/IMG]) [/QUOTE]

Verification