Reply to thread

Message: <blockquote data-quote="NDMstang65" data-source="post: 5895040" data-attributes="member: 544576">You have to allow at least 30mm infront of the cone for movement...Cutout OD is the cut out outer diameter of the entire speaker (you can go 12 5/8" as the gaskets tend to vary from time to time), Hole diameter is the..hole diameter for the speaker to be cut out on and mounted to.If you are trying to wedge it behind a seat you need to have at LEAST 7" behind the sub (which is the "mounting depth" it includes the basket, and the motor down from the mounting flange) and another 1.5" or so infront of it for cone movement..</blockquote>

Top