Reply to thread

Message: <blockquote data-quote="shauncox26" data-source="post: 8465467" data-attributes="member: 654960"><p>I had this happen with a c2 threatcon 2 12 when over powered the coil left the gap all together and caused a clicking noise. This lead to triple joint failure and the coil getting deformed on the return trip into the gap. Are the tensile leads stitched or woven if not it is most likely the leads slapping at high excursion. Don't think you are physically driving the coil out of the gap like on my c2.</p></blockquote><p></p>

Top