Reply to thread

Message: <blockquote data-quote="pentavolvo" data-source="post: 5488472" data-attributes="member: 549798">there is no kit u have to do it urself, pull the radio out with the din tools, then pull the dash off it just pops off after u undo 2 screws above the area behin the radio, u will have to trim/file down the dash to actually fit the dbl din, there will be a gap on the side to fill with a trim ringwith the dash off u should be able do drill 2 holes into the side and screw the radio in via that</blockquote>

Top