Sold F/S Profile 1200sx 900x1 rms @ 2ohm / 450x2 @ 4 ohm . good budget amp!

[ampjunkielikeme 10+ year member]

100.00 shipped to the cont usa ..........comes with a 30 day warranty!

this is a 2 foot long older style profile 1200sx , but to me its the better of all the profile amps made....,it has a few scratches, but it works 100% ...the board looks like it should be in more expensive amp...lol

it had 2 bad parts in the output section, in the left channel of the amp, so i replaced all 12 of the output fets (both channels) with brand new date matching parts, and bench tested it for 3 hours hooked up to my 12's in my room and gave it a good workout......works great! ...

as long as you run this amp at 4ohm bridge or 2 ohm each channel stereo, i will give a 30 day warranty on the output section....

link to ampguts:

http://ampguts.realmofexcursion.com/Profile_California_1200SX/

specs:

2 x 300W @ 4 ohms (THD

2 x 450W @ 2 ohms

1 x 900W @ 4 ohms bridged

Fuse: 4 x 20A

for a small fee ...lol (15.00) I can polish the top of the amp to a mirror finish, if whoever buys it wants me to.. i think it would make it look alot better....

check out the board! sexy to be a profile i must say...lol

Click to read more...

 

[oldschool4me 10+ year member]

those were decent amps, those and the white ones they had.

 

[revrider1 5,000+ posts]

Nice lookin amp

 

[ampjunkielikeme 10+ year member]

thanks guys.....yes the other white 1200's were good too... this should make somebody a good amp...

 

[ampjunkielikeme 10+ year member]

ttt

 

[ampjunkielikeme 10+ year member]

ttt

 

[ampjunkielikeme 10+ year member]

ttt

 

[HillTownBoss 10+ year member]

is that the lowest you willing to take for this?

 

[ampjunkielikeme 10+ year member]

price drop.........and it even has a warranty...lol

 

[ampjunkielikeme 10+ year member]

is that the lowest you willing to take for this?

how about 85.00 and you pay for shipping...???

 

[HillTownBoss 10+ year member]

how much is shipping to 28458 and will this amp go well with 2 pioneer dvc 12s 400rms each

 

[ampjunkielikeme 10+ year member]

16.00 post office+ delivery confirmation.......

as long as your subs wire up to get a 4 ohm load bridged ,or 2 ohm load each channel , you will be ok...you cant run the amp bridged at 2 ohms it will blow......

 

[HillTownBoss 10+ year member]

They are already wired I didnt do it but I'm going to rewire it what would be the best way because I'm good with installing being doing it for years but I'm just not sure with those DVC's

 

[ampjunkielikeme 10+ year member]

do you have a multimeter ? set it to ohms and find out what yours are reading......

we can go from there...

 

[HillTownBoss 10+ year member]

naw I need to get me one of those where can I get one?