Sold F/S - Motors, Recones, Baskets, Woofer Tester, CA Glue, Pole Plug, & MORE

massiveaudiocw
10+ year member

CarAudio.com Veteran
Rating: 100%
9 0 0
Got a few recones and motors & recones laying around that I plan on building but work has been crazy lately and have not had much free time.

RE HC Motor - Great shape, very minimal cosmetic flaws. No major chips or deep scratchs, I would rate it 8.5-9 out of 10. $90 + Shipping

Shocker X-treme Motor - Its a TC-9 based motor in good shape w/ dual 3/4" slugs and eclipse motor boot. No major chips or scratchs, I would rate it 8-8.5/10. $50 + Shipping

15" RE HC / TC Sounds 3k Recone, Basket, & Gasket - Brand new recone, basket, and basket gasket from Dave aka TeamPSI. The basket is a claw basket like the origonal mag used but in a 15. D2 flat wond, 1500rms, stitched/woven leads, RE style full cone inverted DC, etc. $125 Shipped

15" Shocker Extreme / TC Sounds TC-9 (w/ .5" top plate) Recone, Basket & Gasket - Brand new recone, basket and gasket from Dave aka TeamPSI. The basket is DD/AQ basket. D1, 1500++ rms, stiff spiders, DD style leads, stitched tinseal leads, etc. $125 Shipped

Digital Designs 9510G Recone, Basket & CF DC - Brand new dual 2 recone from DD. The CF DC and basket are used but in GREAT shape. $175 Shipped

Aluminum Sundown Audio Nightshade Pole Plug - Will work with alot of motors w/ 3" coils. Can get ID and OD unless Jacob wants to post them. $25 Shipped

2oz GA Glue & Accel - Bought it from Dave aka TeamPSI, IIRC its $25 Shipped from him, will do $20 Shipped

Dayton WT3 Woofer Tester - LNIB $75 Shipped

SPL SPLW-10 Subwoofer - New out of box. Huge 8.5" diameter double stack mag. Planned on testing it out and reconing it but never got around to it. Would make a great sub with better soft parts. $75 + Shipping

Also have a **LNIB** Lightning Audio Storm X2.H10.V4 & **Mint** Light Audio Storm X2.Neo motor that I would be willing to sell for the right price //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif.

Will not split up the baskets and recones. May consider trades and reasonable offers. Everything will ship via USPS Priority mail (no exceptions unless you want to send me a prepaid UPS or FedEx shipping Label). The motors should fit in a large flate rate box, to save on shipping costs.

 
Will you be coming to Jeff's show next sunday? what are you looking to get out of that neo motor?
Maybe, depends how bussy I am. Dont realy want to sell it but would like to get what I got into it, $220.
BTW everyone, sorry for the rushed responces and spelling errors. Its hard to find the time to check the site and when I do, I dont have alot of time.

 
Re-directs air behind the former for a more effective cooling solution than a simple pole vent. This plug is solid aluminum so also acts like a heat-sink.
So if I was build lets say a TC-9 to take an Orion 2500d @ 1ohm daily, could this help me more then the pole vent, provided it fits?

 
It fits in a TC-9 and yes that would help.
I'd go with this plug and an 8-layer flat coil to achieve your goal.
how does this force are over the former? Where does the air actually come from? Sorry, I just cant picture it in my head.

Iv been talking with dave about a recone. Needs to be a nice long former. 12" TI basket FTMFW //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

OP let me see how much the recone will cost and such and I will get back to you. Im pretty interested. I hope you have it for a little bit yet.

 
The dust cap pushes and pulls air -- the air has to go somewhere //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

If you have a pole vent the air comes in and out of the pole... if you have this plug it has to **** it in from the basket vents, over the coil, over the former, and up under the cap... then it has to push it back out the same way.

We use this plug on our Nightshades.

 
The dust cap pushes and pulls air -- the air has to go somewhere //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
If you have a pole vent the air comes in and out of the pole... if you have this plug it has to **** it in from the basket vents, over the coil, over the former, and up under the cap... then it has to push it back out the same way.

We use this plug on our Nightshades.

I think it should work for me then. May I email you to talk about about this further instead of clutering his FS thread?

OP thank him for selling your chit lol.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

massiveaudiocw

10+ year member
CarAudio.com Veteran
Thread starter
massiveaudiocw
Joined
Location
Upstate NY
Start date
Participants
Who Replied
Replies
38
Views
3,990
Last reply date
Last reply from
massiveaudiocw
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top