Sold f/s f/t diamond, cdt

dkguitarist
5,000+ posts

CarAudio.com Veteran
Rating: 0%
0 0 0
hey everyone. well as it turns out my cdt's are too big to fit in my stock door locations and i won't ever get the money to make some kicks so i decided i wanna get rid of these and my diamond amp as well. maybe trade for another component set/amp/cash. so here's the goods:

-diamond d3 400.2 amp (specs taken from this seller's ebay listing: http://cgi.ebay.com/DIAMOND-CAR-AUDIO-D3400-2-STEREO-2CH-AMP-AMPLIFIER-NEW_W0QQitemZ5873916775QQcategoryZ18796QQssPageNameZWDVWQQrdZ1QQcmdZViewItem)

Brand: Diamond Audio

Condition: New

RMS Power Output: 200W x 2 @ 2 Ohm

Peak Power Output: 400W x 2 @ 2 Ohm

Birdged Output: 400W x 1 @ 4 Ohm

Signal To Noise Ratio: 100dB

Frequency Response: 20Hz-20KHz

Input Sensitivity: N/A

THD @ 4 Ohm RMS Power: 0.05%

Ohm Load Stability: 2 Ohm

Low Level Input: Yes

Built in Cooling Fan: No

Bass Control Knob: No

Dimensions: 12"L x 8.5"W x 2.25"H

RMS Output Power

100 x 2 @ 4 Ohm Stereo RMS 200 X 2 Peak

200 x 2 @ 2 Ohm Stereo RMS 400 X 2 Peak

400 x 1 Bridged @ 4 Ohms RMS 800 X 1 Peak

Freq Response: 20Hz-20KHz

Signal-to-Noise Ratio: >100dB

THD: 0.05%

L. 12" W. 8.5" H. 2.25"

It is in brand new condition has been taken out of box. i have never used it. never seen power i believe. great amp for someone's components. ~$150+shipping. willing to trade as well.

-cdt cl-61 components. (specs taken from cdt's website)

6.5" 2-Way component set

Mid: Stamped 6.5"

Crossover: Elliptic 2-Way SatNat-400

Tweeter: TW-24 1" silk soft dome

Power Handling: 130 watt RMS

Frequency Response: 65-20kHz

Sensitivity: 90.2 dB

Impedance: 4Ohm

Surface & Flush mount swivel

does not have the flush mount housing. they are used. bought them off ebay. i haven't used them. comes with box, paper, speakers, crossovers, tweeters, and the surface mount housing, grills. looking for ~$130+shipping. willing to trade as well. i can get pics and refs upon request. also my email is dcguitarist@hotmail.com.

 
Are you willing to trade? I have the following available: soundstream xstream 180.2, kenwood excelon kac-x541, kenwood excelon kac-810d, sony xplod 10 disc cd/mp3 changer, kenwood excelon dual mag 5.25" components, kenwood excelon 6.5" coaxials, in car stand-alone nesa dvd player w/ remote, 2 audiobahm 1206t's w/ ported box.

Let me know if you wanted any of that. Also, you probably don't want to part out the CDT's, but I have the same set with the smaller tweeter. Would you be willing to trade or sell just the tweets?

 
Are you willing to trade? I have the following available: soundstream xstream 180.2, kenwood excelon kac-x541, kenwood excelon kac-810d, sony xplod 10 disc cd/mp3 changer, kenwood excelon dual mag 5.25" components, kenwood excelon 6.5" coaxials, in car stand-alone nesa dvd player w/ remote, 2 audiobahm 1206t's w/ ported box.
Let me know if you wanted any of that. Also, you probably don't want to part out the CDT's, but I have the same set with the smaller tweeter. Would you be willing to trade or sell just the tweets?
i'd really prefer to keep it as a set. it might be harder to sell it without the tweets. got specs on the dvd player? and specs on the kac-x541?

 
i'd really prefer to keep it as a set. it might be harder to sell it without the tweets. got specs on the dvd player? and specs on the kac-x541?
No specs on the DVD player, but it plays DVD's, Mp3's, Mpegs (music vids burned off of your computer to a regular cd), CD-RW's, and it has the remote and mounting brackets if no DIN is available.

The KAC-X541 has the following specs:

Kenwood Excelon 960 Watt Bridgeable 4 Channel Amplifier

Continuous Power Output @ 4 Ohms Stereo: 60 Watts (rms) x 4

Continuous Power Output @ 2 Ohms Stereo: 120 Watts (rms) x 4

Continuous Power Output @ 4 Ohms Bridged: 240 Watts (rms) x 2

Maximum Power Output Of 960 Watts (max)

MOSFET Switching Power Supply

Built In Crossovers: High/Low/All Pass

Continuously Variable Crossover From 50 Hz To 200 Hz

High Pass Crossover Slope Of 12 dB/Octave

Low Pass Crossover Slope Of 24 dB/Octave

Selectable Sub Sonic Filter Set @ 15 Hz, Slope Of 24 dB/Octave

Bass Extension Circuitry

Bass EQ Frequency: 60/80/100/200 Hz

Bass "Q" Factor Adjustments

Bass EQ Level Adjustments Variable From -15 dB to + 15 dB

Treble EQ Frequency: 10/12.5/15/17.5 KHz

Treble EQ Level Adjustments Variable From -15 dB to + 15 dB

Dual Speed Cooling Fan

Gold Plated Pre-Amp Inputs

Gold Plated Pre-Amp Outputs

Illuminated LCD Status Display: Volts/Temp/Current/Cooling Fan

Toroidal Noise Suppression Filters

Large Internal Capacitor Bank

Copper Shielded Transformers

Thermal Protection Circuitry

Overload/Short Circuit Protection Circuitry

AMS System Ready

Tri-Mode Operation

Gold Plated Terminals

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

dkguitarist

5,000+ posts
CarAudio.com Veteran
Thread starter
dkguitarist
Joined
Location
Oklahoma City, Oklahoma, United States
Start date
Participants
Who Replied
Replies
15
Views
948
Last reply date
Last reply from
dkguitarist
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top