i couldn't edit my old listing , so i made a new one
100.00 shipped!
i have a old school precision power made , mtx terminator250....it has a simular board to a a ppi promos50.....both very good cheater amps......
this amps works 100%......it is in very good condition...(a little dusty) never been repaired.....
it has been upgraded with bigger gauge power wires, and speaker wires soldered right to the board,,,way better than using the old plug......
gut pics here: http://ampguts.realmofexcursion.com/...nator_MTA_250/
specs:
Output Power at 12.5V:
2 x 50W @ 4 ohms (0.02% THD)
2 x 100W @ 2 ohms
2 x 200W @ 1 ohm
2 x 400W @ ½ ohm
1 x 200W @ 4 ohms bridged
1 x 400W @ 2 ohms bridged
1 x 800W @ 1 ohm bridged
High Current Amplifier built by PPI
Very similar to the ProMos 50
100.00 shipped!
i have a old school precision power made , mtx terminator250....it has a simular board to a a ppi promos50.....both very good cheater amps......
this amps works 100%......it is in very good condition...(a little dusty) never been repaired.....
it has been upgraded with bigger gauge power wires, and speaker wires soldered right to the board,,,way better than using the old plug......
gut pics here: http://ampguts.realmofexcursion.com/...nator_MTA_250/
specs:
Output Power at 12.5V:
2 x 50W @ 4 ohms (0.02% THD)
2 x 100W @ 2 ohms
2 x 200W @ 1 ohm
2 x 400W @ ½ ohm
1 x 200W @ 4 ohms bridged
1 x 400W @ 2 ohms bridged
1 x 800W @ 1 ohm bridged
High Current Amplifier built by PPI
Very similar to the ProMos 50
