experts how to put this all together?

[wone 10+ year member]

ok guys, so this is what i have, i have a few 4 channel choices and i need to know the correct way of putting this thing together. im not a noob but just wanna know the best choice of amps and speaker configuration.

in my truck now i have 3 mtx 3404 amps wich are (50 watts x 4 @ 4 Ohms) (100 watts x 4 @ 2 Ohms) (200 watts x 2 @ 4 Ohms (Bridged)

i also have a JL 450/4 v2: wich is (150 watts RMS x 2 and 75 watts RMS x 2 at 1.5 to 4 ohms) (300 watts RMS x 1 and 150 watts RMS x 1 at 3 to 8 ohms)

and i also have a memphis mc4.125: (RMS Power 4 Ohm : 125W x 4) (RMS Power 2 Ohm : 180W x 4) (Bridged Mono Power 4 Ohm : 360W x 2)

now as for speakers im finishing up my fiberglass doors and each front door panel is gonna have

2- 8 inch quantum qpm8c speakers (MAX POWER: 275 Watts) (RMS POWER: 175 Watts)

1- 6.5 inch quantum qpm6fn speaker (MAX POWER: 245 Watts) (RMS POWER: 125 Watts)

IMPEDANCIA: 8 OHM

1- 1 inch quantum qpt1d tweeter (MAX POWER: 300 WATTS) (RMS POWER: 150 WATTS) IMPEDANCE: 4 OHMS

and each rear door is gonna have.

1- 8 inch quantum qpm8c

1- 6.5 quantum qpm6fn

1- 1 inch quantum tweeter

so how do i tie all this together and what amp is best for this setup?

Click to read more...

 

[wone 10+ year member]

no one?

 

[Louisiana_CRX 5,000+ posts]

It sounds like your JL is staggered powered....run the 150x2 on the 8's...the 75x2 on the highs ...then run the memphis 125x2 on the 6,5;s...I'd recomend an external active crossover to get your gains and frequencies set right unless your deck has active capabilities

 

[wone 10+ year member]

so your saying the jl amp on all the 6 8's and the tweeters? would that be enough? and throw the memphis amp to the 6.5's?

anything wrong with running the mtx amps?