Reply to thread

Message

<blockquote data-quote="Keny" data-source="post: 8603228" data-attributes="member: 673870">Hi guys, just joined today ! Sorry if this thread has been posted before. I’ve read over a dozen posts about my situation and can’t find a solution, or the their problem was slightly different than mine.What I have : Rockford F. P3001 , And two 10” dtx subs. And a kenwood deck (They came with the car)The Situation / Problem : my amp is plugged in and everything is good there ( I think)&nbsp; ground is good, power is good, fuses are good, remote wire has power (checked with a voltage meter). The subs are wired correctly. But they don’t make any sound or anything ...I don’t think they’re broken because when I clip my voltage meter to the power cable, and touch the remote wire, I can hear the subs getting power cause they both go “THUD” when the amp turns on. But then no music still?It’s driving me nuts. I have no clue what to do lol. All 4 speakers in my car work, the deck works fine , are my subs just not getting enough power? Or is it my wiring harness? I haven’t really checked that cause I’ll have to take my whole console out (again) and it’s a pain to get to.Any thoughts ? I’ll respond to questions as soon as I can. Thanks again! And sorry if you get posts like this all the time. I’m learning</blockquote>

[QUOTE="Keny, post: 8603228, member: 673870"] Hi guys, just joined today ! Sorry if this thread has been posted before. I’ve read over a dozen posts about my situation and can’t find a solution, or the their problem was slightly different than mine. What I have : Rockford F. P3001 , And two 10” dtx subs. And a kenwood deck (They came with the car) The Situation / Problem : my amp is plugged in and everything is good there ( I think) ground is good, power is good, fuses are good, remote wire has power (checked with a voltage meter). The subs are wired correctly. But they don’t make any sound or anything ... I don’t think they’re broken because when I clip my voltage meter to the power cable, and touch the remote wire, I can hear the subs getting power cause they both go “THUD” when the amp turns on. But then no music still? It’s driving me nuts. I have no clue what to do lol. All 4 speakers in my car work, the deck works fine , are my subs just not getting enough power? Or is it my wiring harness? I haven’t really checked that cause I’ll have to take my whole console out (again) and it’s a pain to get to. Any thoughts ? I’ll respond to questions as soon as I can. Thanks again! And sorry if you get posts like this all the time. I’m learning [/QUOTE]

Verification