edead....is it any good?

[flakko 5,000+ posts]

eh with the socal heat, eDead goes eDead. in the winter and spring it was fine, but come summer, it all fell off

 

[RoudyruffKK 10+ year member]

dynamat xtreme i've always used it and will continue to. i'm not willing to take the chance it might peel off and stick somewhere else

 

[dustinr 10+ year member]

I'd rather sound deaden my car with Aluminum foil then that eDead shit.

 

[skeptikal Premium Member]

I'd rather sound deaden my car with Aluminum foil then that eDead shit.

lol I wouldn't.

 

[Eugenics 5,000+ posts]

I'd rather sound deaden my car with Aluminum foil then that eDead shit.

and you have what in your car right now?

 

[swaptrex 10+ year member]

i haven't had any problem with mine yet...don't why everyone is bashing it. i got it pretty cheap.

 

[Spr0ket 10+ year member]

For deadening, look around for Ant's threads... they are top notch. You'll want to do three things for bringing the sound stage in the front up.

Mass Loading

1: Deaden the doors like mad, inner skin and exterior skin

2: Kick panels and floor

Barrier Loading

3: 1/2" - 1" open cell foam between the panel and hatch

In addition, you can also barrier load with closed cell foam on the floor to reduce even more road noise. Also, you may want to get a rubberized undercoat put on to help dampen the last bit of noise. For the finishing touches... use Sludge over the top of the applied sheet deadeners.