Reply to thread

Message: <blockquote data-quote="audioholic" data-source="post: 1359398" data-attributes="member: 549629"><p>Depends what the coil impedances are, and what final impedance you wish to attain for maximum output from your amplifier. Parallel will halve the impedances wired together (two 4ohm coils paralleled equals one 2ohm load), and series doubles (two 4ohms in series make a single 8ohm). Its most common to see parallel wiring as most people are trying to gain relatively low impedances for 'high current' amplifiers.</p></blockquote><p></p>

Top