Reply to thread

Message: <blockquote data-quote="darkmatter" data-source="post: 8264700" data-attributes="member: 643400"><p>I went from a Pac Soem4 to a phoenix gold R500.4 amp in 4 channel mode to factory speakers to an Audiocontrol LC2I to the Phoenix Gold Amp bridged to Arc Audio Arc 6.2 speakers. Not sure what is going on when I set it up using a -10db 1khz test tone and a dmm per Audiocontrol's instructions the gain on the amp and the sound was low.  When I turned down the LC2I and the gains up on the amp as a test it sounded a little louder. I set it both ways when bridged to 150 watts so I am a bit confused. I figured 150 watts would sound the same either way it is set.</p></blockquote><p></p>

Top