Reply to thread

Message: <blockquote data-quote="bcarpenterfhl" data-source="post: 660784" data-attributes="member: 557008"><p>i'm guessing theyre tens? if so imo you should give an inch above and below, increasing the enclosure heigth to 12 inches. also when using slotted ports, you should just subtract 1.5 inches (thickness of the top and bottom pieces), so if your external box heigth was 12 inches, the slot heigth would be 10.5 inches. with the slot height set, you figure out what your width should be by dividing the reccomended slot area (pioneer should give it to you, double the rec. slot area when using two subs) by the slot heigth. the solution provides you with the slot width. figure out what you want your dimensions to be (if you indeed want to change them) then i'll attempt to help you with the slot length and overall frequency.</p></blockquote><p></p>

Top