Reply to thread

Message

<blockquote data-quote="twisztdauthorit" data-source="post: 4621287" data-attributes="member: 574525">got this out so far<a href="http://imageshack.us" target="_blank"><img src="http://img208.imageshack.us/img208/1286/newboxme0.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /></a><img src="http://img208.imageshack.us/img208/8506/newbox2wl9.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Still not sure how to deal with the port.I want to incorporate some kerfing and changeable ports, but the two just don&#039;t go together easily.Changeable ports would also be rather large and would take a bit of work to mount them properly.So i might end up going with one large kerfed port on the passenger side facing upThe box atm is a 12ft^3 box but after displacement and such it will drop a few. Was also planning on cutting out a section to hide the batteries but i don&#039;t want to impede airflow in the box to much.In the end, I want to be looking at a 6.5 ft^3 net box</blockquote>

[QUOTE="twisztdauthorit, post: 4621287, member: 574525"] got this out so far [URL="http://imageshack.us"][IMG]http://img208.imageshack.us/img208/1286/newboxme0.jpg[/IMG][/URL] [IMG]http://img208.imageshack.us/img208/8506/newbox2wl9.jpg[/IMG] Still not sure how to deal with the port. I want to incorporate some kerfing and changeable ports, but the two just don't go together easily. Changeable ports would also be rather large and would take a bit of work to mount them properly. So i might end up going with one large kerfed port on the passenger side facing up The box atm is a 12ft^3 box but after displacement and such it will drop a few. Was also planning on cutting out a section to hide the batteries but i don't want to impede airflow in the box to much. In the end, I want to be looking at a 6.5 ft^3 net box [/QUOTE]

Verification