Reply to thread

Message

<blockquote data-quote="twisztdauthorit" data-source="post: 4514487" data-attributes="member: 574525">alright, ill take a look if i get a chance somewhere close by.Added a layer of FG to the Resined up fleece on the drivers pod. Came out ok, Doesnt really want to stick well to the overhanging part so their a quite a bit of tiny airbubles, ill fix that though. Its a way tighter fit to the door this time, i used a thumbtack in one spot where it started falling back off the door but other than that it should be fine. pics later.When that dries, ill pull it off, trim it up, one more layer of FG around the edges and then ill set the placement for the speaker baffles.1 question, do i aim the drivers door towards the driver or the passenger? stupid question i know but kinda important. =/I&#039;m pretty sure its the opposite passenger correct? THis is probably why the imaging sounded off in my last ride //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif</blockquote>

[QUOTE="twisztdauthorit, post: 4514487, member: 574525"] alright, ill take a look if i get a chance somewhere close by. Added a layer of FG to the Resined up fleece on the drivers pod. Came out ok, Doesnt really want to stick well to the overhanging part so their a quite a bit of tiny airbubles, ill fix that though. Its a way tighter fit to the door this time, i used a thumbtack in one spot where it started falling back off the door but other than that it should be fine. pics later. When that dries, ill pull it off, trim it up, one more layer of FG around the edges and then ill set the placement for the speaker baffles. [B]1 question[/B], do i aim the drivers door towards the driver or the passenger? stupid question i know but kinda important. =/ I'm pretty sure its the opposite passenger correct? THis is probably why the imaging sounded off in my last ride [IMG]//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif[/IMG] [/QUOTE]

Verification