Reply to thread

Message: <blockquote data-quote="ta2ed9783" data-source="post: 8208642" data-attributes="member: 658432"><p>I  just purchased a Sundown saz1500d v2 and I need  to know if, since I already have an inline fuse close to battery, do I have to put a second fuse near amp? I  am using 1/0 ga  copper wire  with a stock 90a  alternator and single starting battery. I  have a 200a anl  inline fuse close to battery already. I also have a 250a stinger anl fuse at home if that would be better. I am also running a Fosgate p4004. I will use dist block to separate the two. 4 gauge to Fosgate and 0ga continued to Saz1500. I have been using a Concept cc-d1200  with the Fosgate and my voltage doesn't drop below 13 volts.  Big 3 done in 1/0 copper wire also. Will my amp be at risk? I may end up running a .67 ohm load too.</p></blockquote><p></p>

Top