Reply to thread

Message

<blockquote data-quote="Side Show" data-source="post: 8162253" data-attributes="member: 579446">Number of channels 2Amplifier class ABMono bridge mode 1.33 ohm 1000 W RMSMono bridge mode 2 ohm 870 W RMSMono bridge mode 4 ohm 550 W RMSOutput power in 1 ohm 2 x 425 W RMSOutput power in 2 ohm 2 x 270 W RMSOutput power in 4 ohm 2 x 150 W RMSDamping factor &amp;gt; 200S/N ratio, A-weighted &amp;gt; 100 dBInput impedance, high level N/AInput sensitivity 0,2 - 7 VoltInput impedance &amp;gt; 10kohmFrequency range 10 Hz - 50 kHzHigh pass filter 20 - 200 HzLow pass filter 50 - 125 HzLow level output NoExternal cooling fan terminal YesHigh level input with auto start NoDual DC inputs YesPower consumption (idle) 1,1 APower consumption (max) 140 ARec. power cable Minimum 2AWG / 33 mm2Fuses 4 x 30 ADimension (W x D x H) 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch)Weight 6,2 kg ( 13,67 lb)very nice class/ab amp</blockquote>

[QUOTE="Side Show, post: 8162253, member: 579446"] Number of channels 2 Amplifier class AB Mono bridge mode 1.33 ohm 1000 W RMS Mono bridge mode 2 ohm 870 W RMS Mono bridge mode 4 ohm 550 W RMS Output power in 1 ohm 2 x 425 W RMS Output power in 2 ohm 2 x 270 W RMS Output power in 4 ohm 2 x 150 W RMS Damping factor > 200 S/N ratio, A-weighted > 100 dB Input impedance, high level N/A Input sensitivity 0,2 - 7 Volt Input impedance > 10kohm Frequency range 10 Hz - 50 kHz High pass filter 20 - 200 Hz Low pass filter 50 - 125 Hz Low level output No External cooling fan terminal Yes High level input with auto start No Dual DC inputs Yes Power consumption (idle) 1,1 A Power consumption (max) 140 A Rec. power cable Minimum 2AWG / 33 mm2 Fuses 4 x 30 A Dimension (W x D x H) 410 x 240 x 73 mm (16,15 x 9,45 x 2,87 inch) Weight 6,2 kg ( 13,67 lb) very nice class/ab amp [/QUOTE]

Verification